Dell Brocade Adapters Troubleshooting Manual page 84

3
Data collection using host system commands
TABLE 5 Host system data collection commands (continued)
Task
Locating system log
messages
NOTE: For more
information, refer to
"Host system logs"
on page 69.
Showing operating system
distribution info
Locating BFA configuration
file
Locating BFA device file
Locating BNA device file
Verifying network interface
parameters, such as link
status, IP address, and
subnet mask.
Ethernet statistics
Ethernet link status
1. Solaris does not support Brocade 804 and 1007 adapters so Solaris commands do not apply to these adapters.
60
Linux Windows
dmesg, System Category in
/var/log/message* Windows Event Viewer
(eventvwr.exe)
(SuSE) cat systeminfo.exe
/etc/SuSE-release,
(RedHat) cat
/etc/redhat-release
/etc/bfa.conf Windows Registry
(HKEY_LOCAL_MACHINE
\SYSTEM\CurrentContro
lSet\Services\bfad\Para
meters\Device), adapter
Flash
/dev/bfa* Windows Registry
(HKEY_LOCAL_MACHINE
\HARDWARE\DEVICEMA
P\Scsi\Scsi Port x)
/dev/bna* Windows Registry
(HKEY_LOCAL_MACHINE
\HARDWARE\DEVICEMA
P\Scsi\Scsi Port x)
ifconfig ipconfig
Settings > Network
Connections
ethtool -S netstat
<interface_name>
ethtool netstat
interface_name>
VMware
/var/log/vmkernel*
/var/log/vmkwarning*/proc
/vmware/log
/var/log/message*
cat /etc/vmware-release
/etc/bfa.conf
/opt/brocade/adapter/bfa/
bfa.conf
/dev/bna*
ifconfig
ethtool -S
<interface_name>
esxcfg-nics -l
Brocade Adapters Troubleshooting Guide
1
Solaris
dmesg,
/var/adm/message*
uname -a, cat
/etc/release
/kernel/drv/bfa.conf
•
(Release 1.0) -
/devices/pci*/pci*/
fibre-channel@0:dev
ctl,
•
(Release 1.1 and
later) -
/devices/pci*/pci*/
bfa@0:devctl
•
(Release 1.0) -
/devices/pci*/pci*/
fibre-channel@0:dev
ctl,
•
(Release 1.1 and
later) -
/devices/pci*/pci*/
bfa@0:devctl
N/A
N/A
N/A
53-1002145-01