Dell Brocade Adapters Troubleshooting Manual page 155

TABLE 14
Message
Import of Names is
complete, <Count>
name(s) failed to import
due to invalid
WWW/MAC Address
Installation is not
complete beyond the
timeout value.\nClosing
the driver update
operation.
Invalid time range. Enter
a valid time range.
IOC for Port 1 will be
disabled to enable
trunking. Do you want to
proceed?
Log Invalid cannot be
configured as Eth logging
level.
Log Invalid cannot be
configured as Port
logging level.
Loopback test cannot be
performed on pre-boot
disabled port
Member not found. Team
modification failed.
Modify Team failed due
to an unexpected error.
<Runtime Reason>
Name should start with
an alphabet. Allowed
characters are 0-9, A-Z,
a-z, hyphen (-) and
underscore (_) and
should not exceed 15
characters
New password should
not be blank.
No configurations need
to be saved
No item found
No Team for deleting
Brocade Adapters Troubleshooting Guide
53-1002145-01
Host Connectivity Manager messages (continued)
Cause
Occurs when user imports the names file with
invalid WWNs or MAC addresses.
Occurs when the installation has not
completed and the timeout value is reached.
Occurs when the user enters an invalid time
range in the Masterlog Log Filter dialog box.
Occurs when the user tries to enable trunking
on the adapter.
Occurs when the user selects Log Invalid from
the Eth Logging Level menu in the Basic Port
Configuration dialog box.
Occurs when the user selects Log Invalid from
the Port Logging Level menu in the Basic Port
Configuration dialog box.
Occurs when user executes loopback test for
preboot disabled port.
Occurs when user modified a team while
another user removes the respective adapter.
Occurs when a runtime error happens while
modifying the team.
Occurs when user provides a invalid name with
special characters other than hyphen and
underscore or name with more than 15
characters.
Occurs when New Password field is left blank.
Occurs when the user selects Apply on the
VLAN Configuration or Teaming Configuration
dialog box without making any modifications.
Occurs when the user searches for a
WWN/MAC/name that does not exist using the
search option in the Configure Names dialog
box.
Occurs when the user selects Delete when
there is no team configured.
HCM and Installer Message Reference
Corrective Action or Notes
Verify that all the WWNs and MAC
addresses in the names file are
valid.
Information message.
Enter a valid time range and collect
the events logged for that time.
Warning that selected port's IOC will
be disabled when you enable
trunking.
Set valid logging level and proceed.
Set valid logging level and proceed.
Make sure the preboot port is in
enabled state and then execute the
loopback test
Verify whether the adapter still
exists in the host.
Determine why the error occurs.
Enter a valid name which does not
include any special character, other
than hyphen and underscore, and is
not more than 15 characters.
Enter a password in the New
Password field and proceed
Information message. Nothing was
configured, so nothing will be saved.
Provide an existing
WWN/MAC/name when searching.
Information message.
B
131