Operating System Errors (Blue Screen); Driver Event Messages Appearing In Host System Log Files - Dell Brocade Adapters Troubleshooting Manual

•
Action: Refer to
information to isolate this problem on stand-up adapters.

Operating system errors (blue screen)

If critical errors display for the host system and the system blue screen appears, refer to the
following descriptions of possible causes and recommended actions to help resolve the problem.
Possible Cause: Adapter driver not loaded.
Action: Refer to
installation.

Driver event messages appearing in host system log files

If event messages for the adapter driver are appearing in the host system log files, refer to the
following descriptions of possible causes and recommended actions to help resolve the problem.
Possible Cause: Various causes and severity levels.
Action: Follow the recommended action in the message.
Action: Resolve critical-level messages and multiple major or minor-level messages relating to the
same issue as soon as possible.
Action: For details on event messages, refer to
Brocade Adapters Troubleshooting Guide
53-1002145-01
NOTE
Observe the LEDs on adapter ports (stand-up adapters only). Illuminated LEDs indicate
connection, link activity, and connection speed negotiated with the attached device. For
the meaning of LED operation, refer to the Brocade Adapters Installation and Reference
Manual.
If the system freezes perform the following tasks:
a. Verify whether the host system firmware supports PCIe specifications listed in the Brocade
Adapters Installation and Reference Manual. If not, download a firmware update to
support the adapter.
b. Verify compatibility by reviewing the Brocade interoperability matrixes on the Brocade
adapters website at www.brocade.com/adapters.
c. On Windows systems, determine when the system freezes during the boot process. If it
freezes as the driver loads, uninstall and reinstall the driver. If it freezes during hardware
recognition, uninstall both the driver and adapter, then reinstall both.
d. Remove the adapter and reboot the system. If the system boots, reinstall the adapter.
e. Reseat the adapter in the host system.
f. Uninstall and reinstall the driver.
g. Try installing the adapter into a different compatible slot.
h. Try installing the adapter into another host system. If the problem does not occur, the
adapter may not be compatible with the original host system. If the problem occurs in the
new system, replace the adapter.
"Verifying Fibre Channel and DCB links (stand-up adapters)"
"Adapter driver installation verification"
General adapter problems
on page 51 for methods to verify driver
"Logs" on page 69.
2
on page 50 for more
13