Remote Port Statistics - Dell Brocade Adapters Troubleshooting Manual

3
Statistics
3. Select the type of statistics that you want to run from the Statistics Name list.
4. Select the polling interval.
5. Click Apply to save your changes.
To display the Historical Performance dialog box and graphs for a port, use the following steps.
1. Select a device for which you want to generate a historical performance graph.
2. Select Monitor > Performance.
3. Select the Enable Historical Data Collection check box to display the Historical Performance
4. Select the type of statistics that you want to run from the Statistics Name list.
5. Click Apply to save your changes.

Remote port statistics

Remote port statistics can help isolate end-to-end login problems. Use HCM and BCU to display
statistics for the following:
•
•
•
•
•
•
•
As an example of using these statistics for troubleshooting, if the host cannot see the target, you
can verify that the remote port (rport) is reporting itself online by comparing the rport offline and
rport online statistics. The rport online counter should be one greater than the rport offline counter.
If not, clear the counters and retry connecting to the remote port. Verify the rport online and rport
offline statistics again.
Displaying target statistics through HCM
Launch the Target Statistics dialog box using the following steps to display target statistics.
1. Launch the HCM.
2. Select the base adapter port from the device tree window.
3. Click Monitor > Statistics > Remote Port Statistics > Target Statistics.
84
dialog box.
Port login (PLOGI) activity
Authentication and discovery (ADISC) activity
Logout (LOGO) activity
RCSNs received
Process logins (PRLI) received
Hardware abstraction layer (HAL) activity
Remote port speed capability (RPSC)
Brocade Adapters Troubleshooting Guide
53-1002145-01