Performance Data; Phy Module Statistics - Dell Brocade Adapters Troubleshooting Manual

Brocade adapters troubleshooting guide
Hide thumbs Also See for Brocade Adapters:
Table of Contents

Advertisement

Displaying logical port statistics through BCU
Use the lport --stats command to display logical port statistics.
lport –-stats <port_id> [-l <lpwwn>]
where:
port_id
-l lpwwn

Performance data

Using HCM, you can collect real-time and historical performance data on the following managed
devices:
Data is displayed in graphs using utilization (Mbps) and errors per second. Polling intervals can be
configured to 10, 20, and 30 seconds. Data collected will not be lost once the graph is closed.
To generate a real-time performance graph for a device, complete the following steps.
1. Select the device (such as adapter, remote port, virtual port) Ethernet node) for which you want
2. Select Configure > Performance > Realtime Statistics.

PHY module statistics

The Ethernet PHY module, located in the mezzanine card port hardware, aids in communications to
and from the Ethernet LAN. Use the bcu phy --stats command to display the following statistics:
bcu phy --stats <port_id>
Brocade Adapters Troubleshooting Guide
53-1002145-01
ID of the port for which you want to display statistics. This could be the
PWWN, port hardware path, or user-specified port name. This could also be
the adapter-index/port-index. For example, to specify adapter 1, port 1, you
would use 1/1 as the port identification.
Logical port world wide name for which you want to display statistics. This is
an optional argument. If the -l lpwwn argument is not specified, the base port
is used.
Port statistics for the adapter.
Virtual Port statistics on the virtual port
Ethernet statistics on the Ethernet node
FCP IM statistics on the remote port
to generate a real-time performance graph.
PHY status
Line breaks after linkup
PMA (physical medium attachment sublayer) and PMD (physical medium dependent sublayer)
receive and transmit faults
PCS (physical coding sublayer) receive and transmit faults
Speed negotiations
Transmit EQ trainings and timeouts
CRC errors
3
Statistics
81

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brocade 815

Table of Contents