Manual Dial (On-Hook And Off-Hook Dialing) - Xerox WorkCentre Pro 575 Advanced Features Manual

Dialing Methods
4-2

Manual Dial (On-hook and Off-hook Dialing)

To initiate On-hook dialing press the Manual Dial key, dial the
number and listen for a facsimile tone, then press the Start key to
initiate a transmission.
To initiate Off-hook dialing, lift the optional handset* from the cradle,
dial the number and listen for a fax tone, then press the Start key to
initiate a transmission.
You can perform all the dialing methods in this mode. To dial the
remote station using Manual Dial:
1. Load the document face down in the Document Support.
2. If desired set the Resolution and Contrast.
3. Lift the handset*, or press:
Manual
Dial
4. Enter the fax phone number then press Enter , if necessary. To
enter a pause, press the Pause key. To enter a Charge Code,
press the Charge Code key after the telephone number.
5. The machine dials the number and connects with the remote
machine. When you hear the fax tones press the Start key. If you
are using On Hook dialing and the remote operator answers, you
can pick up the handset* to talk. When you are finished talking
you can still send a document by requesting a fax tone and
pressing Start , then place the handset* in the cradle.
The machine sends the document and returns to the Standby Mode.
* Not available in all markets.
Jan-31 02:23pm 100%
Auto answer
Fax number (128 max)
[
Communicating
5554444
WorkCentre Pro 555/575
]