Table of Contents
Advertisement
Dialing Methods
4-8
Automatic Redialing*
When the line of the party you are calling is busy, the machine
automatically redials the number according to the redial interval
selected.
Hint:
To change the redial settings, press:
Menu
(See Chapter 2, "Redial Count & Interval Setting".)
If the line is not connected after the redial attempts, the machine goes
into a Transmission Error mode, and you must repeat the
transmission procedure.
If the Resend Stored Fax feature is active, the documents are
retained in memory and can be resent (see Chapter 5, "Resend
Stored Fax Default Setting".)
Manual Redial Last Number (Off-hook)
This redial function enables you to transmit a document to the party of
the number last dialed by the operator using the machine.
To redial the last number, a fax number must be stored for resend or
you must load a document:
1. Pick up the handset*, if available, or press:
Manual
Dial
2. Press Redial key. The display indicates the last number dialed.
3. When you hear the fax tone, press Start .
The machine dials the number. If the connection is confirmed the
document is sent. If the line is still busy, the job remains in the
pending job list.
* Not available in all markets.
Fax number (128 max)
[
WorkCentre Pro 555/575
]
Advertisement
Table of Contents
Troubleshooting
