Xerox WorkCentre Pro 575 Advanced Features Manual page 138

Transmitting Documents
5-34
To perform a ITU-T Relay Transmission:
1. Load the document face down in the Document Support.
2. Select the desired Resolution and Contrast .
3. Press:
Menu
4. Using the Numeric Keypad enter a relay box number, then press
Enter .
Note: A Password is required to receive to a Relay Box.
5. Select the Password option:
To assign a password, press
If you do not want to assign a password, press
step 7.
6. Using the Numeric Keypad, enter the password you want to
assign to this box, then press Enter .
7. Enter the Speed Dial or One Touch key that you preset for the
Relay Station, (You must press Phonebook then press Enter
before entering a speed dial number).
The document is sent to the Relay Station. The Relay Station will
then retransmit the document to the specified End Stations.
Box number (20 max)
[
Set up password
2.No
1.Yes
and go to step 6.
and go to
Send(Relay)
Enter fax number
WorkCentre Pro 555/575
]