Charge Codes - Xerox WorkCentre Pro 575 Advanced Features Manual

Transmitting Documents

Charge Codes

5-10
The Charge Code function key is used to enter a charge code in a
telephone number.
Charge codes can be entered manually during Keypad dialing or
stored in the Speed Dial and One Touch numbers for dialing numbers
that always require this feature. (Refer to the Chapter 2, "Setting up
the Phonebook".)
To enter a Charge Code when sending a document:
1. Load the document face down in the Document Support.
2. Select the desired Resolution and Contrast .
3. Using the Numeric Keypad, manually enter the fax number.
4. Press:
Charge
Code
5. The WorkCentre places a "+" in the phone number to indicate that
a Charge Code is to follow.
6. Enter the Charge Code.
The Charge Code is entered and hidden with "$" symbols displayed in
place of the code.
7. Press Enter to start the job.
Fax number (128 max)
5151212+
Fax number (128 max)
5151212+$$$
WorkCentre Pro 555/575