Transmitting Using A Department Code - Xerox WorkCentre Pro 575 Advanced Features Manual

Transmitting Documents
5-28

Transmitting Using a Department Code

When the Department Code option is set, the "Enter Dept. code"
screen is displayed.
To set or change Department Codes, refer to Chapter 2, "Changing
Department Codes".
To use the machine:
Enter the 5-digit Department Code, then press Enter .
The standby mode screen displays.
If no activity is performed within 1 minute after entering the
Department Code, the display returns to the "Enter Dept. code"
screen.
Jan-31 02:23pm 100%
Enter Dept. code
WorkCentre Pro 555/575