Deleting A Mailbox; Using Department Codes; Setting Up Department Codes - Xerox WorkCentre Pro 575 Advanced Features Manual

Using the ControlCentre

Using Department Codes

11-22

Deleting a Mailbox

1 Click the Mailbox icon.
2 Select the mailbox you want to delete.
Note: To delete all the mailboxes at once, click Clear All.
3 Click Delete.
4 Click Apply to set the options at the WorkCentre.
You can control access to the WorkCentre by setting up a master
department code and individual department codes. The master
department code enables one person to create and change up to 49
individual department codes.
You might want to create a department code for each department in
your organization. After informing the individuals within each
department of their code, they must enter their code to use the
WorkCentre. You can print the Department Code Report for a record
of each department's usage of the WorkCentre.

Setting up Department Codes

1 Click the General icon and then click the Department Code tab.
The Master Code Entry dialog box opens.
2 Type a five-digit code. Note the code you typed as it is required
to set up and change department codes.
3 Click OK.
4 Click the Add button.
The Department Code Entry dialog box opens.
5 In the Department ID (0-99) box, select the number to use for the
department.
6 In the Department code (00000-99999) box, type the five-digit
code you want to assign to the department.
7 In the Department name box, type the name you want to assign
to the department.
8 Do one of the following:
•
Click OK to close the Department Code Entry dialog box.
WorkCentre Pro 555/575