Table of Contents
Advertisement
E
Safety Certification and Environmental
Compliance
WorkCentre Pro 555/575
Your Xerox product and supplies have been designed and tested to
meet strict safety requirements. These include safety agency
examination and approval, and compliance to established
environmental standards. Please read the following instructions
carefully before operating the equipment and refer to them as needed
to ensure the continued safe operation of your machine. The safety
testing and performance of this product have been verified
using Xerox materials only.
Follow all warnings and instructions marked on or supplied with the
product.
!
* Symbology:
Unplug this equipment from the wall outlet before cleaning. Always
use materials specifically designated for this product. Use of other
materials may result in poor performance and could create a
hazardous situation.
Do not use aerosol cleaners. Follow the instructions in this User
Guide for proper cleaning methods.
Never use supplies or cleaning materials for purposes other than
what they were intended. Keep all supplies and materials out of reach
of children.
Do not use this product near water, wet locations, or outdoors.
Do not place this product on an unstable cart, stand or table. The
product may fall, causing personal injury or serious damage to the
copier
= General warning alerts user to the risk of
personal damage. Example of specific
warning
= Warning Heated Surface
E-1
Advertisement
Table of Contents
Troubleshooting
