Xerox WorkCentre Pro 575 Advanced Features Manual page 177

WorkCentre Pro 555/575
4. Enter the remote sub address and press Enter.
5. To enter a password, press
numeric keypad, enter the remote password, if required by the
remote machine, and press Enter .
6. To exit the menu, press
7. Using one of the dialing methods, enter the remote phone
telephone number and press Enter .
8. Press Start .
9. If a security code is required, press
code obtained from the remote operator, then press Enter .
If no security code is required by the sending machine, press
Note: The sub address entered in this procedure overrides a sub
address programmed in a One Touch or Speed dial
number.
Mailbox Communications
to select PWD. Using the
to select Done.
Load document
To poll press START
Add security code
1.Yes
2.No
. Then enter the security
8-19