Xerox WorkCentre Pro 575 Advanced Features Manual page 45

WorkCentre Pro 555/575
2. Using the Numeric Keypad, enter the number (1-1999) you want
to assign to this group.
3. Press:
Enter
4. Using the Numeric Keypad, enter the Group name, then press
Enter .
5. Press the One Touch key you want to include in this Group, or
enter the Speed Dial number and press Enter .
6. Repeat step 5 to enter additional numbers.
7. When you entered each number you want to include in this
group, press Enter .
Hint: Group Transmissions are easier if a group is linked to a
One Touch Key.
8. To assign this group to a One Touch key, press the One Touch
key. To skip this step, press Enter .
9. The "Enter Group Number" screen redisplays. Press Exit or Stop
to return to the Standby Mode.
Programming the Machine
Group dial number
(1-9999)
Name
[
Enter speed dial
or One touch
Press OT or speed
dial or ENTER
Press One touch
or ENTER
[ 25]
]
2-27