Xerox WorkCentre Pro 575 Advanced Features Manual page 151

WorkCentre Pro 555/575
5. Select the type of security used when the previous document was
stored to the Poll-once box.
If no security was used, press
If only a security code was used, press
If only the remote fax number was used, press
If both the remote fax number and a security code were used,
press .
– or –
6. Using the numeric keypad, enter the Security Code, Fax Number
or both that were used when the previous document was stored
in this Poll-once box. Press the Enter key after each entry.
7. Select the change option:
To delete and replace the stored document, press
document is scanned and the machine returns to the Standby
Mode.
To add this document to the stored document, press
document is scanned and assigned a job number.
The machine returns to the Standby Mode.
To retain the current stored document, press
press Stop . The machine returns to the Standby Mode.
, then go to step 7.
.
.
Security code
[ ]
Secure fax (20 max)
[
Already assigned
1.Delete
2.Add+
3.Retain
and then
Polling
]
. The
. The
7-7