HP StorageWorks P9000 Reference Manual page 95
Business continuity manager software reference guide
Hide thumbs
Also See for StorageWorks P9000:
- Manual (333 pages) ,
- User manual (322 pages) ,
- Reference manual (236 pages)
Table of Contents
Advertisement
Table 64 Contents of the Scan Copy Pair Inside Storage System Panel
Item
Device Address
Primary
Domain
Secondary
BC Pair (S-VOL) Non
Gen'ed
CA Copy Group ID
TCA Copy Group ID
BC Copy Group ID
Description
Specify the Device Address Domain ID to which the P-VOL of the PPRC
copy pairs to be scanned belong (required).
Use no more than 28 alphanumeric characters. If the specification
exceeds 8 characters, place a period every 8 characters. Hyphens
cannot be specified.
Specify the Device Address Domain ID of the S-VOL of the PPRC copy
pairs to be scanned belong (required for CA or CAA).
Use no more than 28 alphanumeric characters. If the specification
exceeds 8 characters, place a period every 8 characters. Hyphens
cannot be specified.
Specify the Non Gen'ed Device Address Domain ID to which the S-VOL
of the PPRC BC copy pairs to be scanned belong (required when the
S-VOL of the BC copy pair is a Non Gen'ed volume).
Use no more than 28 alphanumeric characters. If the specification
exceeds 8 characters, place a period every 8 characters. Hyphens
cannot be specified.
Specify a CA copy group name (required only when a Device Address
Domain ID is specified for Secondary).
Two-digit serial numbers beginning with 00 are assigned in ascending
order to the copy group names specified by this parameter (for
example, 00, 01, 02...). You can specify a maximum of six characters
for a copy group name. Do not use hyphens. The initial display is
MYTCS.
Specify a TCA copy group name (required only when a Device Address
Domain ID is specified for Secondary).
Two-digit serial numbers beginning with 00 are assigned in ascending
order to the copy group names specified by this parameter (for
example, 00, 01, 02...). You can specify a maximum of six characters
for a copy group name. Do not use hyphens. The initial display is
MYTCA.
Specify a BC copy group name.
Two-digit serial numbers in ascending order beginning with 00 are
assigned to the copy group names specified by this parameter
(example: 00, 01, 02 ...). Use no more than 6 characters for the copy
group name. Hyphens cannot be specified. No initial value is
displayed.
Discover/Define Configuration Panel (Configuration File Definition)
95
Advertisement
Table of Contents
