HP StorageWorks P9000 Reference Manual page 62

Figure 53 Path Set Detail Panel
Table 43 (page 62)
Table 43 Contents of the Path Set Detail Panel
Item
Path Set ID
AC
Type
SHR
Primary
Dir
Secondary
1 Valid only when the Type is DKC.
2 Valid only when the Type is CU.
In the initial state, the information is displayed in ascending order by priority, as follows: the S/N
(EBCDIC), PathID (hexadecimal number) and then the CU (hexadecimal number) for Primary.
When you press F3=Exit in the Path Set Detail panel, the Confirm Configuration File Update panel
(see "Confirm Configuration File Update Panel" (page
to the path set definition file.
62 ISPF Panels
describes the items in the Path Set Detail panel.
Description
Path set ID
Specify an action.
e— Displays the Edit Logical Path Definition panel used to display or edit a logical path.
d— Deletes a logical path from the path set
When actions are entered in multiple AC columns, each is processed in the order displayed
Type of path
CU— Inter-CU logical path
DKC— Inter-DKC logical path
Shared attributes for the path
Y— This path has shared attributes.
N— This path has no shared attributes.
S/N Primary storage system serial number
PathID Primary path ID
CU Primary CU number
SSID Primary SSID
Direction of the path
S/N Secondary storage system serial number
PathID Secondary path ID
CU Secondary CU number
SSID Secondary SSID
1
2
1
2
180)) is displayed to confirm the modifications