HP StorageWorks P9000 Reference Manual page 340

Table 151 Device Information Structure (continued)
REXX variables
BC
340 Data Objects
Status
PairCt
SuspendOpCt
TransCt
SuspendErCt
Trem
0
n
State
ProtectMode
InitPace
MatchingPerCent
Pri SSID
Serialnum
CUNum
CCA
Sec SSID
Serialnum
CUNum
CCA
Description
4
ATTIME suspend status
Notset: The ATTIME suspend time is not set.
PRESET: The ATTIME suspend time is set, but
suspend has not been performed.
SUSPEND (TIMESTAMP): Suspend was
performed because the ATTIME suspend time
elapsed.
SUSPEND (TIMEOUT): Suspend was
performed because a timeout occurred.
4
Number of copy pairs in the C/T group
4
Number of suspended copy pairs
4
Number of suspending copy pairs
4
Number of failure suspended copy pairs
4
Time remaining until timeout (minutes)
Number of BC copy pairs (0 to 3)
Status of BC copy pair
PENDING (01)
DUPLEX (02)
TRANS (03)
SUSPOP (04)
PENDING (05)
SUSPER (06)
SUSPVS (07)
REVRSY (08)
TRANS (09)
Protect mode
PROTECT
PERMIT
Copy pace
SLOW
NORMAL
Copy pair matching rate
SSID of P-VOL
Storage system serial number of P-VOL
CU number of P-VOL
CCA of P-VOL
SSID of S-VOL
Storage system serial number of S-VOL
CU number of S-VOL
CCA of S-VOL