HP StorageWorks P9000 Reference Manual page 193

Format
YKBLDPTH
STEM(stem-name-1)
1
MSG(stem-name-2)
1
[ PSN(storage system-serial-number)[
1
[ SSN(storage system-serial-number)[
1
[ {FORWARD|REVERSE}]
1
[ TYPE({CU|DKC})]
1
Function
This command is a TSO/E command called from REXX scripts.
This command establishes logical paths for some or all of the paths identified in the path set that
is stored in the path set structure with the prefix specified by the STEM parameter.
Parameters
STEM(stem-name- 1 ) ~ <REXX prefix of 64 or fewer characters>
Specify the prefix of the name of the path set structure that stores information about the logical
path to be established. Specify the same character string as the one specified in the STEM parameter
of the YKLOAD command that loaded the corresponding logical path. You must also include a
trailing period character.
MSG(stem-name-2) ~ <REXX prefix of 64 or fewer characters>
Specify an optional prefix for the name of the message structure used to store the messages to be
generated by this command. You must also include a trailing period character.
The message structure is initialized when the Business Continuity Manager command with the same
name as the MSG parameter is called.
PSN(storage system-serial-number) ~ <from 5 to 12 alphanumeric characters>
If this parameter is specified, for each logical path within the path set stored in the path set structure
specified for the STEM parameter, inter-CU logical paths will be established that treat CUs within
storage systems (that have the serial number specified by this parameter) as MCUs, and inter-DKC
logical paths will be established that treat the storage system (that has the serial number specified
by this parameter) as the primary storage system.
If neither this parameter nor any other parameters are specified, the command establishes all
logical paths.
PCU(cu-number) ~ <2-digit hexadecimal number>
If this parameter is specified, for each logical path within the path set stored in the path set structure
specified for the STEM parameter, inter-CU logical paths will be established, for each of which the
CU number of the MCU matches the value specified for this parameter. Inter-DKC logical paths
are not affected by this parameter.
If neither this parameter nor any other parameters are specified, the command establishes all
inter-CU logical paths.
SSN(storage system-serial-number) ~ <from 5 to 12 alphanumeric characters>
If this parameter is specified, for each logical path within the path set stored in the path set structure
specified for the STEM parameter, inter-CU logical paths will be established such that the paths
treat CUs within storage systems (that have the serial number specified by this parameter) as RCUs,
and inter-DKC logical paths will be established such that the paths treat the storage system (that
has the serial number specified by this parameter) as the secondary storage system.
PCU(cu-number)]]
1
SCU(cu-number)]]
1
Command details 193