HP StorageWorks P9000 Reference Manual page 172

Figure 132 Path Set Status of Copy Group Pair Panel
Table 89 (page 172)
Table 89 Contents of the Path Set Status of Copy Group Pair Panel
Item
Copy Group ID
AC
Type
Primary
Dir
Secondary
Status
172 ISPF Panels
describes the items in the Path Set Status of Copy Group Pair panel.
Description
Copy group ID
Specify an action.
s: Displays the Logical Path Status of Copy Group Pair panel used to
display the status of physical paths in the logical path.
Path type
CU: Inter-control unit logical path
DKC: Inter-disk controller logical path
Serial# Serial number of the primary storage system
PathID Primary path ID
When the path type is CU, nothing is displayed.
CU Primary control unit number
SSID Primary SSID
Path direction
Serial# Serial number of the secondary disk controller
PathID Secondary path ID
When the path type is CU, nothing is displayed.
CU Secondary control unit number
SSID Secondary SSID
Status of the logical path used by the copy pair
ESTABLISHED n/n PORT(S): All defined physical paths have been
established (where n indicates the number of defined physical paths).
ESTABLISHED m/n PORT(S): Among all of the physical paths defined
by the hardware, only those established are displayed (where m indicates
the number of physical paths in the ESTABLISHED status, and n indicates
the number of defined physical paths).
INVALID: An error has occurred on a physical path.