HP StorageWorks P9000 Reference Manual page 143

Table 81 Contents of the Volume Query Information (CA) Panel (continued)
Item
4
Freeze SCP :
DIF UNIT
CONSLOST(P-S)
Other CopyPair Primary/Secondary
6
Information
Description
Freeze the storage system (place in SCP status)
when a failure suspension (SUSPER) occurs.
Y: Places in SCP status.
N: Does not place in SCP status.
If one of the following conditions is satisfied,
N/A is displayed:
The consistency group ID is not registered
in the storage system.
The Open/MF Consistency Preservation
Function is not used.
Information cannot be acquired.
Unit of difference management
Whether data on the P-VOL and the S-VOL is
inconsistent (the CONSLOST status) due to the
copy process of the related Compatible
FlashCopy being interrupted during execution
of the Preserve Mirror function.
Y: Copy process of the related Compatible
FlashCopy was interrupted.
N: Normal status
This item is displayed in the format
P-VOL-status-S-VOL-status.
In either of the following cases, N/A is
displayed:
SIMPLEX is displayed for Status under both
Primary Volume and Secondary Volume.
The information cannot be obtained.
Type The following information is displayed if there
are any other copy pairs apart from the one
specified in the Copy Group Pair Status panel.
Copy type
Indication of whether it is information on
the P-VOL or S-VOL (Pri or Sec)
C/T ID Consistency group ID and subconsistency
group ID
SN
For Primary: storage system serial number
for the P-VOL of the copy pair specified in
the Copy Group Pair Status panel
For Secondary: storage system serial
number for the S-VOL of the copy pair
specified in the Copy Group Pair Status
panel
Manage Copy Groups Panel (Copy Group Operation) 143
5, 1
5