Download Print this page

Motorola MICOM-2ES Owner's Manual: Using The New Station Address Filter

Hf-ssb transceivers ale mil-std-188-141b.
Hide thumbs

Advertisement

MICOM-2ES/2RS/2TS ALE Supplement to Owner's Guide

Using the New Station Address Filter

To help you add new station addresses to the ALE directory of your radio set in a
controlled manner, MICOM-2 has a special ALE address filter. To enable this filter,
enable the Auto Address function on the
function can also be enabled by means of the RSS).
When enabled, the address filter compares the source address of each call received
by your radio set with the addresses stored in the ALE directory. When the first new
unlisted address is found, it is stored in a special memory stack, and you are notified
that at least one unlisted address has been detected by adding the option
under PROG>ALE, after the
stored in the stack, you select
or add it to the ALE directory of your radio set.
Up to 20 new addresses can be stored in this stack, which is organized as a FIFO
stack: this means that when a new address, different from all the previously detected
addresses, is received while 20 addresses are already stored, it will replace the oldest
address.
The information on the received addresses is automatically erased when the radio is
turned off; only addresses added to the directory remain in the directory.
To edit the received addresses and add addresses to the ALE directory:
1. Press
MENU
2. When addresses are stored in the new received
addresses stack, you will see the
Press
RCV
3. You will see RCV screen. The screen displays the
last detected unlisted address. Use the
arrows to display the desired address (the display is
cyclical).
4. When the desired address is displayed, press the key corresponding to the
action to be performed:
To delete the address from the stack, press
To add the address to the directory, press
removed from the stack
5. To confirm, press
6. Repeat the actions until all the desired addresses are
processed. When done, press
If the stack is now empty, the
menu.
_________________________________________________________________________________________________
62
NET
option. When you want to check the addresses
RCV
(F2) and then decide whether to erase an address
(F1) and select
(F2) to display the RCV screen.
SAVE
(F4).
RCV
PROG>ALE>OPT>AADR
ALE
(F2)
RCV
(F2) option.
UP/DOWN
ESC
to end.
(F2) option is no longer displayed on the ALE
menu (this
MOTOROLA
RCV
5061
ADD
ERAS
MOTOROLA
ALE
PROGRAMMING
NET
RCV
ERAS
(F2).
ADD
(F1). The address is
RCV
(F2)
SAVE
AMDs
DIR
AMDs

Advertisement

   Related Manuals for Motorola MICOM-2ES

This manual also for:

Micom-2rs, Micom-2ts

Comments to this Manuals

Symbols: 0
Latest comments:
  • Arlindo silva Jan 29, 2015 10:28:
    sou usuario de um Trasrecept​or Motorola micom 2rs necessito aceder aos manuasis