MICOM-2ES/2RS/2TS ALE Supplement to Owner's Guide
5. After the link is established, you will see a LINK
message. Now you may press the PTT and start
6. To disconnect the link, press the
To transmit an individual call with MultiNet ON:
The radio displays the current net number, flashing.
If you wish to change the currently used net, press
3. The radio displays the last called station.
stations, or use the keypad to enter a station name
and then press
required station name appears.
5. The radio now starts the link set up process. During this process, you will
see TO alternating with the number of the channel the set up request is
being sent (the channel may change, if the called station does not answer on
the first channel(s)).
If the link with the selected station cannot be set up, you will see
for a few seconds a flashing NO LINK message.
If you want to call again the same station, double-press the PTT to
use the quick-call feature (see page 28).
keys or enter the net number on the
to confirm the net number.
keys to scroll between
While the radio is initializing the link, you can press
to abort the entire process.
to initiate the call