To send a message during a call (link state):
1. Press
PAGE
Note
2. Select or edit the desired message as explained on
page 29.
3. Press
SEND
4. The radio now starts the link set up process for this
message (this process is similar to the process used
to set up the link for this call). During this process,
you will see TO alternating with the number of the
channel being used.
Note
_________________________________________________________________________________________________
(F2).
If this function key is not displayed, you
cannot send a message in the present
mode.
(F1) or
ENTER
•
While the radio is initializing the
link, you can press
ESC
to abort the entire process.
•
If the link needed to send the
message to the selected station
cannot be set up, you will see for a
few seconds a flashing NO LINK
message.
to send the message.
STOP
(F1) or
New ALE Features
MOTOROLA
LINK
1009
SEND
PAGE
CHAN
MONs
MOTOROLA
AMD11
11 AMD MESS
SEND
EDIT
CHAN
<->s
MOTOROLA
TO
1234
STOP
PAGE CHAN
MONs
MOTOROLA
CH 2
1234
STOP
PAGE CHAN
MONs
31