To Send Global Allcall Using The Call Function - Motorola MICOM-2ES Owner's Manual

MICOM-2ES/2RS/2TS ALE Supplement to Owner's Guide
To send global AllCall using the
1. Press ESC
radio starts sending the GL AllCall.
During this process, you will see TO alternating with
the number of the channel on which the set up
request is being sent.
Note
2. After a delay, you will see LINK with a flashing GL
ALLCALL.
3. Confirm the link set up by pressing
PTT. The GL ALLCALL message stops flashing,
and you can start talking.
4. Press PAGE
See page 31 for details.
5. To end the call, press ESC.

To send global AllCall using the CALL function:

1. Press CALL
The radio displays the last called address.
2. Press the
ALLCALL.
3. Press PAGE
details.
4. Press SEND
The call now proceeds as for call initiated by pressing the
_________________________________________________________________________________________________
34
continuously for a few seconds. The
While the radio is initializing the link, you can press
or ESC to abort the entire process.
(F2) if you want to send a message.
(F1).
UP/DOWN keys until you reach GL
(F2) if you want to add a message to the call. See page 30 for
(F1) or ENTER
ESC key:
ENTER or the
to start the call.
MOTOROLA
TO
GL ALLCALL
STOP NET GRP
MOTOROLA
CH 2
GL ALLCALL
STOP NET GRP
STOP (F1)
MOTOROLA
LINK
GL ALLCALL
MOTOROLA
LINK
GL ALLCALL
STOP PAGE GRP
MOTOROLA
END CALLING
MOTOROLA
CALL
1001
SEND PAGE CHAN
MOTOROLA
CALL
GL ALLCALL
SEND PAGE CHAN
ESC key.
ANYs
ANYs
MONs
MONs
MONs