Receiving Calls in ALE Mode
When your MICOM 2 receives a call, it displays its type and the source address.
You are also notified when a message is attached: if a
message is received, the name of the calling station is
preceded by an exclamation mark.
For any type of call, if the ALERT attribute is programmed to YES, you will hear the
alert tone when a message is received.
Receiving an individual call:
When an individual call (i.e., a call addressed only to
your station) is received, the name of the calling station
blinks in the display.
Note
Receiving a net call:
When an individual call (i.e., a call addressed only to
your station) is received, the name of the calling station
blinks in the display.
Receiving an AllCall:
Note
When an AllCall is received, the display flashes an
AllCall alert that alternates ALLCALL with the calling
station name.
_________________________________________________________________________________________________
If the calling station name is too long and does not fit in the
display,
<-->
appears next to F1. Press
View mode.
You can program your radio to ignore incoming AllCalls. If the
radio is set to ignore incoming AllCalls, it stops scanning when an
AllCall is received but it does not display, nor lets you hear the
call. At the end of the AllCall, the radio automatically returns to
the scanning mode.
New ALE Features
MOTOROLA
FROM
!ABC
MOTOROLA
FROM
ABC
<-->
(F1) to enter the
MOTOROLA
FROM
NET CALL
MOTOROLA
FROM
ABC
MOTOROLA
ALE
ALLCALL
MOTOROLA
FROM
ABC
17