Download Print this page

Motorola MICOM-2ES Owner's Manual Page 74

Hf-ssb transceivers ale mil-std-188-141b.
Hide thumbs

Advertisement

MICOM-2ES/2RS/2TS ALE Supplement to Owner's Guide
MultiNet: enable/disable the scanning of multiple ALE nets. When
MNT
enabled, this feature lets the radio communicate with stations in nets
other than the currently selected net.
MxCH Maximum Scan Channels: when MultiNet is enabled, the time needed
for scanning all the nets may be rather long. This parameter is used to
adapt the duration of the calling signal to the number of scanned net,
to ensure that communications are not disrupted.
You can use automatic selection, or select a specific value in the
range of 0 to 59 seconds.
AnyCall: enable/disable the sending of AnyCalls.
ANY
WILD Wildcard: enable/disable the sending wildcard calls.
Automatic Message Display: enable/disable the sending of AMD
AMD
messages.
Inlink: enable/disable the inlink facility, which enables notifying
ILNK
other call participants when each participant disconnects from the
link. All participants must be programmed to use the same selection
(either YES or NO).
Do not enable the inlink function when communicating with a radio
that does not support the full ALE capabilities in accordance with
MIL-STD-188-141B.
BDLK Bidirectional link: enable/disable the automatic setting up of a link on
the best channel after a bidirectional handshake with an individual
station.
The ALE options have the following factory-default values:
PTT Timeout
Alert
External Alarm
Auto Address
Quick Call
Minimum LQA score
Accept Link Timeout
MNT
MxCH
ANY
WILD
_________________________________________________________________________________________________
60
No timeout
Yes
Yes
No
Yes
0
Yes
Yes
Auto
Yes
Yes

Advertisement

   Related Manuals for Motorola MICOM-2ES

This manual also for:

Micom-2rs, Micom-2ts

Comments to this Manuals

Symbols: 0
Latest comments:
  • Arlindo silva Jan 29, 2015 10:28:
    sou usuario de um Trasrecept​or Motorola micom 2rs necessito aceder aos manuasis