Welcome Welcome to the world of Motorola digital wireless communications! We are pleased that you have chosen the ® Motorola DC800 Bluetooth Transceiver. 1 Pairing Button. 2 Power Button.
Transceiver Indicators Stereo Transceiver Status LED Indicator Power Off Pairing Mode On (Steady) Pairing 10 rapid flashes Successful Standby (No Flashes every Music Playing) 3-seconds (0.1 seconds ON, 2.9 seconds OFF) Standby (Music Flashes every Playing) 8-seconds (2.0 seconds ON, 6.0 seconds OFF)
Always obey the laws and regulations on the use of these products. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc.
Contents Introduction....12 Transceiver Controls ... 14 Using Your Transceiver ..17 Connecting To Your Home Audio System .
Safety Information IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR DEVICE. Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
(2) this device must accept any interference received, including interference that may cause undesired operation. See 47 CFR Sec. 15.19(3). Electromagnetic Interference/Compatibility Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility.
equipment that is sensitive to external radio frequency (RF) energy. Aircraft When instructed to do so, turn off your device when on board an aircraft. Any use of a device must be in accordance with applicable regulations per airline crew instructions. Medical Devices Hearing Aids Some devices may interfere with some...
shielded from RF energy. Your physician may be able to assist you in obtaining this information. Industry Canada Notice to Users Operation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Ref IC Self-Marking 6(f) and RSP-100 Sec. 4. FCC Notice to Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver.
MP3 player over your home audio system speakers • Play CDs on your home audio system and send the music wirelessly to your Motorola Bluetooth Stereo Headset • Use high power Bluetooth (Class 1) which allows you to roam...
• Play MP3’s from your home computer or laptop and listen to them over your home audio speakers using the Motorola USB Adapter. Your computer and stereo can be up to 300 feet (100 meters) apart. • Use your transceiver with any...
Transceiver Controls 1 Pairing Button. 2 Power Button. 1 Pairing Button — Connects transceiver to other Bluetooth devices, such as the HT820 headset. 2 Power Button — Turns transceiver on or off. Introduction...
3 Housing Feet. 3 Housing Feet — Built-in recessed feet rotate 90 degrees allowing the transceiver to stand vertically. Feet fold flush for compact storage. Introduction...
4a Audio Out Left 4b Audio Out Right 5a Audio In Left 5b Audio In Right 6 Power Jack 4 a & b Audio Out Left / Audio Out Right — Music output from your transceiver to play on your home audio system.
Using Your Transceiver Your transceiver can connect to any device that contains audio input and output jacks. The following steps describe how to connect to your home audio system. The steps are the same to connect the transceiver to any other device with audio input and output jacks.
Connecting To Your Home Audio System The transceiver transmits stereo music ® to a Bluetooth enabled device such as the HT820 Stereo Bluetooth Headset. It also also receive stereo music from a Bluetooth enabled device such as a mobile phone, MP3 player, or PC. Using Your Transceiver...
To connect your transceiver: Step 1 Use the included RCA cables to connect the Audio Out Left and Audio Out Right jacks on the transceiver to unused Audio In Left and Audio In Right jacks on your home audio system. Home Audio System Audio Out Right Audio Out Left...
Step 2 Using the remaining RCA cables, connect the Audio In Left and Audio In Right jacks on the transceiver to an unused Audio Out Left and Audio Out Right jacks (sometimes labeled Tape Out or CD-R Out) on your home audio system.
Step 3 Plug the included AC power supply into the Power Jack. Power Jack 4 Plug the other end of the power supply into a wall outlet. Using Your Transceiver...
Step 5 Turn the transceiver on by pressing the Power Button. Power Button. Using Your Transceiver...
Pairing Your Transceiver with a Bluetooth Headset Note: You must pair your transceiver with another device in order to transmit music to the other device. “Pairing” links devices equipped with Bluetooth wireless technology and allows the devices to remember the other device’s unique ID.
To pair your transceiver with a Bluetooth headset, place them close to each other and: Step 1 Put your headset into pairing mode (refer to your headset’s user’s guide). 2 With the headset in pairing mode, press and hold the Pairing Button on the transceiver for about 5 seconds until the Pairing Button remains solidly lit.
Step 3 When the transceiver finds the headset the Pairing Button flashes rapidly indicating that pairing is successful. You can now transmit stereo music from the transceiver to your stereo headset. 4 On your home stereo, select the output the transceiver is connected to and listen on your stereo Bluetooth headset.
Pairing your Transceiver with a Bluetooth Phone or Music Player To pair your transceiver with a stereo enabled Bluetooth phone or music player, place them close to each other and: Step 1 Turn on the transceiver by pressing the Power Button. Power Button.
When the pairing scan completes, the phone or music player displays the devices found to pair with. 3 Select Motorola DC800 from the device list and continue responding to the screen prompts. 4 When prompted, enter the passkey,...
Pairing to Additional Devices Your transceiver can store pairing information for up to eight different Bluetooth wireless devices. Device IDs are stored in the “Paired Device List” in memory in the order entered. If you try to pair more than eight devices, the oldest paired device is removed from the list.
a connection with the transceiver becomes the “last connected” device. Transceiver Features To use transceiver features: Device Status Bluetooth Device Transceiver Action Enter Pairing (Configuration) Mode: Hold Pairing Button 5 seconds until LED remains solidly lit. Transceiver searches for Bluetooth devices.
Device Status Bluetooth Device Transceiver Action Turn On the Transceiver: On in idle On Press the Power Button. The transceiver attempts to connect to the last device it was connected Turn Off the Transceiver: Press the Power Button. Stop Audio Transmission: On–...
Device Status Bluetooth Device Transceiver Action Re-enable Audio Transmission: Short press Pairing Button LED blinks rapidly. Transceiver Indicators Stereo Transceiver Status LED Indicator Power Off Pairing Mode On (Steady) Pairing 10 rapid flashes Successful Using Your Transceiver...
Stereo Transceiver Status LED Indicator Standby (No Flashes every Music Playing) 3-seconds (0.1 seconds ON, 2.9 seconds OFF) Standby (Music Flashes every Playing) 8-seconds (2.0 seconds ON, 6.0 seconds OFF) Using Your Transceiver...
Export Law Assurances This product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S.
Coverage: Motorola, Inc. warrants this accessory (“Accessory”) against defects in materials and workmanship under normal consumer use for 1 year from the date of purchase. Motorola, at its option, will at no charge repair, replace or refund the purchase price of this Accessory should it not conform to this warranty. This limited warranty is a consumer’s exclusive remedy, extends only to...
Motorola Service Center. To obtain service, you must include a copy of your receipt or other comparable dated proof of purchase, a written description of the problem and your address and telephone number. What Other Limitations Are There? ANY IMPLIED...
RFExposure statement The internal antennas used for this portable transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.