MICOM-2ES/2RS/2TS ALE Supplement to Owner's Guide
LQA
(F3)
Notes
MON
(F4)
RPL
(MORE, F1)
Notes
BAND
(MORE, F2)
SQ
(MORE, F3)
DSP
(MORE, F4)
_________________________________________________________________________________________________
20
displays the channel on which the link was established, and the
LQA score of the current link.
•
If the name of the station you are linked to is not in your
directory, this function will not be available.
•
The LQA (F3) key is displayed only if you established the
link in the ALE mode (in the Channel mode, this function is
not available, because the call is received/transmitted on the
current channel).
turns on and off monitoring by means of the speaker.
replaces the currently-used channel with a channel with a better
LQA score. The radio disconnects the link, replaces the channel
being used, and initiates the call once again.
•
The
RPL
function is available only for individual calls, and
only for the call initiator.
•
The
RPL
(F1) key is displayed only if you established the
link in the ALE mode (in the Channel mode this function is
not available, because the call is received/transmitted on the
current channel).
toggles between upper sideband (USB) and lower sideband (LSB).
The sideband change takes places only after the current call is
ended.
toggles the squelch on/off.
accesses the Digital Signal Processing menu, which includes the
following options:
•
CLAR
(F1) – controls the clarifier (off/lower frequency/higher
frequency).
•
NF
(F2) – controls the notch filter (off/lower frequency/higher
frequency).
•
CLIP
(F3) – toggles the clipper on/off.
•
NB
(F4) – toggles the noise blanker on/off.
•
ATTN
(MORE, F2) – toggles the attenuator on/off.
MORE
MORE