MICOM-2ES/2RS/2TS ALE Supplement to Owner's Guide
To execute a bidirectional handshake with an individual station:
The last called address is displayed. If this is the
address you want, skip directly to Step 6 below.
3. To select a different address, use the
required address in the directory, and then press
If the station you want to add to the group is not in
Enter the new station using the keypad. If you
make a mistake, scroll to the desired position
(F4)) the whole entry and start again.
When ready, press
station in the directory.
handshake process. After confirming the message, exclamation mark
precedes the name of the called station, indicating that a message has been
on a specific channel.
process. During this process, you will see TO alternating with the number of
the channel on which the set up request is being sent.
Before starting, you may want to select a different net to use: see
instructions on page 24.
When MultiNet is enabled, you will be prompted for a net number
as soon as you press
(F2) to enter the LQA menu.
(F2) if you wish to attach a message to the bidirectional
(F3) if you wish to execute a bidirectional handshake process
(F1) to start a call.
(F3), or clear
(F1) to store the new
in order to initiate the bidirectional handshake
keys to scroll to the
to confirm your