To Execute A Bidirectional Handshake With A Net - Motorola MICOM-2ES Owner's Manual

Note

To execute a bidirectional handshake with a net:

1. Press LQA
2. Press BIDR
The last called address is displayed. If this is the net
you want, skip directly to Step 8 below.
3. Press MORE.
4. Press MULT
5. Press NET
Note
6. Press PAGE
7. Press CHAN
channel.
8. Press SEND
you will see TO alternating with the number of the channel on which the
handshake is being sent.
Note
_________________________________________________________________________________________________
During the bidirectional handshake process, you can press
(F1) or ESC to abort the entire process.
(F2) to enter the LQA menu.
(F1).
(F1).
(F1).
You cannot change the net number at this stage – the bidirectional
handshake is always performed on the currently selected net. To
change the net, see page 24.
(F2) if you want to attach a message to the handshake.
(F3) if you want to initiate the handshake on a specific
(F1) or ENTER
While the radio is initializing the handshake, you can press
(F1) or ESC to abort the entire process.
to initiate the handshake. During this process,
New ALE Features
STOP
MOTOROLA
LQA
BDIR SOND CHAN OK s
MOTOROLA
BDIR
1001
SEND PAGE CHAN OK
MOTOROLA
BDIR
1001
MULT PAGE CHAN OK
MOTOROLA
BDIR
NET 1
SEND PAGE CHAN OK
MOTOROLA
BDIR
NET PAGE CHAN OK s
STOP
s
s
s
49