Transmitting A Self Call; To Send A Self-Call - Motorola MICOM-2ES Owner's Manual

MICOM-2ES/2RS/2TS ALE Supplement to Owner's Guide
12. After a delay, you will see LINK with the wildcard
address flashing.
13. Confirm the link set up by pressing
PTT. The address stops flashing, and you can start
talking.
14. To end the call, press ESC.

Transmitting a Self Call

The self-call is a test call addressed to your own address within the currently selected
net. Its purpose is to check that your radio set is OK and can transmit calls (to check
reception, you can simply listen to other radio sets).
When you send the self-call, the radio starts sending calls to its own address,
successively, on each channel in the current net. After going through all the channels,
the call process stops. No other response is expected.
Note

To send a self-call:

1. Press CALL
The radio displays the last called address.
2. Press MORE
3. Press MULT
calls.
4. Press MORE
the next page.
_________________________________________________________________________________________________
46
You can also include the self address in a group call.
(F1).
once.
(F1) to display the first page of special
again to display
ENTER or the
MOTOROLA
LINK
?135?
SEND PAGE LQA MONs
MOTOROLA
LINK
?135?
SEND PAGE LQA MONs
MOTOROLA
END CALLING
MOTOROLA
CALL
1001
SEND PAGE CHAN MONs
MOTOROLA
CALL
1001
MULT PAGE CHAN MONs
MOTOROLA
CALL
ALL NET GRP ANYs
MOTOROLA
CALL
WILD SELF GRP ANYs