Download Print this page

Default Values - Motorola MICOM-2ES Owner's Manual

Ale hf-ssb transceivers support for mil-std-188-141b
Hide thumbs

Advertisement

MICOM-2ES/2RS/2TS ALE Supplement to Owner's Guide
Configure net options, including: sounding, silent network, LQA
OPT
request, scan rate, home acknowledgment, monitor acknowledgment,
occupancy detection, master/slave definitions, AllCall options and
tune time.
Copy all parameters from one network to another. This function is
GET
useful if you are defining a new network and wish to base most of its
parameters on an existing network, for instance if you need to use
different frequencies/channels for day and night communication, but
all other net information (such as stations and names) is identical.
Erase an entire network from the ALE data base.
ERAS
After preparing a set of parameters, your entries are checked and any errors are
reported. If you do not correct the detected errors, MICOM-2 will offer to discard the
new set of parameters.

Default Values

Unless you define different values, each net uses the following factory-defaults:
Net Name
Self Address
AllCall
AllCall Channel
Tune Time
Silent
Home Acknowledgment
Monitor Acknowledgment
Master/Slave
LQA Request
Sounding
Occupancy Check
Scanned Channels
When programming a new network or other ALE parameters, you do not need to
define all parameters – change only those for which the default values are not
suitable.
_________________________________________________________________________________________________
56
No default defined
No default defined
Send and receive enabled
No default defined
No tune time
No
Yes
No
Master
Yes
Manual
No
No default defined.

Hide quick links:

Advertisement

loading

  Related Manuals for Motorola MICOM-2ES

This manual is also suitable for:

Micom-2rsMicom-2ts