MICOM-2ES/2RS/2TS ALE Supplement to Owner's Guide
Sounding is used to test the quality of the channels and propagation paths of all
channels in the net.
The sounding signal is normally repeated automatically, at regular intervals. A
complete round of sounding messages, or "sounding cycle" can be programmed to
30, 60, 90, or 120 minutes, or can be set to OFF.
Sounding can also be initiated manually whenever necessary, even if automatic
sounding is enabled.
To manually initiate sounding:
(F2) to enter the LQA menu.
(F1) to start manual sounding, or
The radio automatically returns to ALE mode when sounding
When the radio transmits a sounding signal, the Tx
indication is visible.
(F2) to stop an ongoing