To transmit a group call:
The radio displays the last called address.
If you see the group you want, skip directly to Step 6
below, otherwise continue as explained below.
2. Select the GRP option as explained on page 32.
3. The first group displayed is always group 1. If this is the group you want,
skip directly to Step 6 below, otherwise press the UP or DOWN arrows until
you see the desired group.
The radio now starts the link set up process. During this process, you will see
TO alternating with the number of the channel on which the set up request is
When a net call is transmitted, each member in the
group responds to the call and the initiator of the call
receives an indication of the response on the display.
7. After links have been established, you can start talking.
8. To end the call, press ESC.
(F2) if you want to attach a message to the group call.
(F3) if you want to initiate the call on a specific channel.
If the selected group does not include at least 2 stations, your
request is rejected and you will see for a few seconds AT
If the addresses in the group have more than 5 different
leading words, your request is rejected and you will see for a
few seconds UFA WRONG.
While the radio is initializing the link, you can press
to abort the entire process.
to initiate the call.
New ALE Features