Table of Contents
Advertisement
Introduction
This Supplement to the "MICOM-2E/2R ALE HF-SSB Transceiver Owner's Guide",
Publication 68P02952C60-A, provides you with information on additional features,
options and MICOM-2 models, which are not documented in the Owner's Guide.
The information presented in this Supplement covers the new versions (Version CK)
of the MICOM-2E/2RS/2TS ALE HF-SSB transceivers. The new versions use
enhanced hardware and provide additional ALE capabilities.
Externally, the new versions are similar to the previous MICOM-2. However,
changes have been made in the wiring of the 44-pin accessories connector located on
the rear panel, relative to the 44-pin connector used by the previous versions.
The information appearing in this Supplement is intended for use with the Owner's
Guide, MICOM-2E/2RS/2TS ALE HF-SSB Transceivers, Publication
68P02952C60-A.
New Model Information
The new transceiver versions have been assigned new model numbers, as follows:
MICOM-2ES
MICOM-2ETS
MICOM-2RS
44-Pin Accessories Connector
Table 1 lists the current functions of the 44-pin accessories connector, J5.
Asterisks * appear in the Designation column next to the pins whose function has
changed, relative to previous equipment versions.
1. The information appearing in Table 1 supersedes any previous
information provided in the Owner's Guide (Publication
68P02952C60-A).
Notes
2. You can continue using the fixed adapter accessory for
MICOM-2ES, MICOM-2ETS and MICOM-2RS (Part No.
09MB000011). This accessory interfaces between the 44-pin
connector and older 25-pin accessories.
_________________________________________________________________________________________________
Model M80AMNOKV5CK
Model M81AMNOKV5CK
Model M85AMNOKV5CK
Introduction
1
Advertisement
Table of Contents
