If the received call includes a message, an exclamation
mark precedes the station name, and the name is
followed by a colon and the message.
If the calling station name and message are too long and
do not fit in the display, press
mode, where you can scroll right and left to display the
To display LQA for the received call:
(F2). You will see the channel in use, and its LQA score.
After the radio successfully receives or transmits a call, it is in the link state.
If the call was received from another radio, the display
includes the word FROM in the first line, as well as the
name of the station which initiated the call (if a message has
been received, it is also displayed).
If the call was initiated by your radio, the display includes
the word LINK in the first line, as well as the destination
Link State Options
While in the link state, you can operate the functions described below using the
To scroll to the desired screen, press MORE.
The change of link options is temporary. When you exit the link
state for the current call, all the changed parameters will be lost.
activates the View mode, where you can view the entire station
address (when over 11 characters), as well as received messages, if
any (when over 11 characters).
enables you to select a message to be sent to the station you are
linked to. After a message is selected, you can edit it.
function is not available when receiving an AllCall.
(F3) to enter the View
New ALE Features