Download Print this page

Auto Dial Parameters; Storing Ale Parameters - Motorola MICOM-2ES Owner's Manual

Ale hf-ssb transceivers support for mil-std-188-141b
Hide thumbs

Advertisement

AMD
ILNK
BDLK
When configuring ALE options, you do not need to define all parameters – change
only those for which the factory-default values are not suitable.

Auto Dial Parameters

Auto Dial enables you to set shortcuts for calls to frequently called stations, with or
without automatically attaching messages when a station is called:
AUTO
AMD
Note

Storing ALE Parameters

Before exiting the ALE programming menu, you must store the parameters you have
programmed.
If you press the MENU or ESC key to exit the programming mode
without first saving your changes, you will be prompted to store the
ALE configuration changes. Press
Important
If you press NO, the configuration will revert to the previous
configuration, and any changes made in the ALE programming
session will be ignored.
_________________________________________________________________________________________________
Yes
No
No
Used to configure up to 10 autodial codes, numbered AUTO 0 to
AUTO 9.
Used to prepare AMD messages for sending when an autodial
code is used. See message preparation details on page 30.
If a message is attached to the address, an exclamation mark
precedes the address.
YES
to store the configuration.
ALE Programming
61

Hide quick links:

Advertisement

loading

  Related Manuals for Motorola MICOM-2ES

This manual is also suitable for:

Micom-2rsMicom-2ts