MICOM-2ES/2RS/2TS ALE Supple
When programming a net, you can set the net names, define the net members, add
channels, configure various options, copy parameters from a defined net or erase an
Net Programming Overview
The net programming mode enables you to view and edit the configuration of each
The configuration includes the following menus:
ment to Owner's Guide
Directory: configuration of the ALE address list.
Messages: preparation of AMD messages to be
sent with ALE calls.
Options: configuration of the various ALE options,
such as PTT timeout, external alarm, and so on.
Autodial parameters: shortcuts for ALE calls to
frequently called stations.
Store the changes made in the ALE programming
key is used to cancel a change you have made, if not yet
confirmed. If you have already saved changes, the ESC key will
only return to a previous screen of the ALE Programming menu.
When you end ALE programming, you must store the parameters
If you press the
without first saving your changes, you will be prompted to store
the ALE configuration changes. Press
configuration. If you press NO, the configuration will revert to
the previous configuration, and any changes made in the current
ALE programming session will be ignored.
You can also edit, or prepare a
new message, on-line.
key to exit the programming mode
See Page ...
to store the