Table of Contents
Advertisement
6. Press the SPACE bar to step to the appropriate protocol. In some cases, there is only one
selection and a value needs to be entered. This is indicated by bold zeros.
possible selections associated with each subclassification (examples: IPX, AppleTalk,
NetBIOS, Banyan Vines, 000.000.000.000, 0x00000000, etc.).
7. In some cases, a selection in the subclassification field requires a value to be entered in a third
field to the right of the subclassification field. If so, use the arrow keys to highlight that third
field and type in the appropriate value. Otherwise, go to
8. Use the arrow keys to highlight the ADD command field.
9. Press ENTER to save the PID and Classification settings. After a brief delay, the Classification
Rule (PID, Classification, and Description) displays in the top half of the screen.
NOTE: After creating a classification rule you must assign it to the appropriate ports
using the Protocol Port Configuration screen described in
8.6.5
Deleting PID/Classification/Description Line Items
All, or one or more, line items can be deleted as follows:
Deleting All Line Items
To delete all configured Classification Rules, use the arrow keys to highlight the DEL ALL
command field and press ENTER.
Deleting One or More Line Items
To delete one or more Classification Rules, mark each entry and then delete them, as follows:
1. Use the arrow keys to highlight a line to be deleted.
2. Press the M key and an asterisk (*) appears next to the highlighted line to mark it. The DEL ALL
command is changed to DEL MARKED.
3. If more than one line item is to be deleted, repeat
NOTE: To remove a mark, perform
highlighted will remove the mark. If all marks are removed, the DEL MARKED command
is changed back to DEL ALL
Priority Classification Configuration Screen
steps 1
and
steps 1
.
802.1p Configuration Menu Screens
Table 8-7
step
8.
Section
8.7.
and
2
to mark each line.
2
. Pressing M when a marked line is
lists the
8-31
Advertisement
Table of Contents
