Enterasys SmartSwitch 2200 Series 2E253 User Manual page 328

Built-in Commands
timed_soft_reset
Description:
Syntax:
Options:
Example:
timed_reset
Description:
Syntax:
11-36 Network Tools Screens
Configures a soft reset in number of seconds, or displays when a soft reset
will occur. The reset_nv and dont_reset_nv commands tell the timed reset if
non-volatile memory should be reset or not. If reset non_volatile is chosen, ip
will be retained. Entering a time of 0 will disable any currently enabled
timed_reset.
timed_soft_reset [ status ] [ t (seconds) ] [ reset_nv | dont_reset_nv ]
status — Displays the current timed soft reset setting.
t (seconds) — Specifies the number of seconds until the device will undergo a
soft reset.
reset_nv — Resets non-volatile memory.
dont_reset_nv — Does not reset non-volatile memory.
-> timed_soft_reset status
timed_soft_reset 10
timed_soft_reset 30
timed_soft_reset 60 reset_nv
Configures a timed reset in number of seconds, or displays when a reset will
occur. The reset_nv and dont_reset_nv commands tell the timed reset if
non-volatile memory should be reset or not. If reset non_volatile is chosen, ip
will be retained. Entering a time of 0 will disable any currently enabled
timed_reset.
timed_reset [ status ] [ t (seconds) ] [ reset_nv | dont_reset_nv ]