Enterasys SmartSwitch 2200 Series 2E253 User Manual page 327

stpRealTimeMsgAge (Continued)
Example:
stpRealTimeMsgAge disable
disabled
suppress_topology_traps
Description:
Enables or disables the generation of topology traps on inter switch links.
Only inter switch link ports that transition to forwarding or blocking cause
the switch to issue a topology trap. By default, this feature is disabled and
will allow the generation of topology traps.
Syntax:
suppress_topology_traps [ enable | disable ]
Options:
enable – Suppresses the generation of topology traps.
disable – Allows the generation of topology traps.
Example:
-> suppress_topology_traps enable
-> suppress_topology_traps disable
telnet
Description:
Allows the user to communicate with another host (that supports Telnet
connections) using the Telnet protocol. The user must specify the remote host
using its IP address. The [IP address] field is mandatory. If no Port number is
specified, telnet will attempt to contact the host at the default port.
Syntax:
telnet [IP address] <Port #>
Options:
IP address — Specifies the IP address of the host.
Port # — Specifies a Telnet port.
Example:
-> telnet 134.141.12.345
Trying 134.141.12.345
Connected to 134.141.12.345
SunOS UNIX (server 1)
login:
Built-in Commands
Network Tools Screens 11-35