Enterasys SmartSwitch 2200 Series 2E253 User Manual page 87

Table 3-13 EAP Diagnostic Statistics Screen Field Descriptions (Continued)
Use this field...
Reauths
Authenticated
(Read-Only)
Starts
Authenticated
(Read-Only)
Logoffs
Authenticated
(Read-Only)
Backend Statistics:
Responses
(Read-Only)
Access Challenges
(Read-Only)
Other Requests To
Supp
(Read-Only)
Non-NAK resp
From Supp
(Read-Only)
Auth Successes
(Read-Only)
Auth Failures
(Read-Only)
To...
See counts of transitions from authenticated to connecting state due to
a reauthentication request.
See counts of transitions from authenticated to connecting state due to
a start from the supplicant (end-user requesting authentication).
See counts of transitions from authenticating to disconnected state due
to a logoff message from the supplicant (end-user requesting
authentication).
See counts of initial access-request frames to the authentication server.
See counts of initial access-challenge frames to the authentication
server.
See counts of EAP request frames transmitted that are not EAP
notification, failure or success-type messages. This frame count
indicates that the authenticator picked an EAP method.
See counts of initial responses to an EAP request from the supplicant
(end-user requesting authentication). Count does not include
EAP-NAK frames. This count indicates that the supplicant can
communicate with the chosen EAP method.
See counts of EAP success messages from the authentication server.
Indicates that the supplicant is successfully authenticated.
See counts of EAP failure messages from the authentication server.
Indicates that the supplicant is not authenticated.
EAP Statistics Menu Screen
Accessing Local Management 3-49