Local Management Keyboard Conventions - Enterasys SmartSwitch 2200 Series 2E253 User Manual

Local Management Keyboard Conventions

Command Fields
Command fields (located at the bottom of Local Management screens) are used to exit Local
Management screens, save Local Management entries, or navigate to another display of the same
screen. In the screens shown in this guide, the characters in this field are all upper case and in bold
type. In the field description, the field is identified as being a "command" field.
1.5 LOCAL MANAGEMENT KEYBOARD CONVENTIONS
All key names appear as capital letters in this manual.
conventions and the key functions that are used.
Table 1-2 Keyboard Conventions
Key
ENTER Key
RETURN Key
ESCAPE (ESC) Key
SPACE Bar
BACKSPACE Key
Arrow Keys
DEL Key
1-6 Introduction
Function
Used to enter data or commands. These keys perform the same Local
Management function. For example, "Press ENTER" means that you
can press either ENTER or RETURN, unless this manual specifically
instructs you otherwise.
Used to "escape" from a Local Management screen without saving
changes. For example, "Press ESC twice" means the ESC key must be
pressed quickly two times.
Used to cycle through selections in some Local Management fields.
Use the SPACE bar to cycle forward through selections and use the
BACKSPACE key to cycle backward through selections.
(UP-ARROW, DOWN-ARROW, LEFT-ARROW, RIGHT-ARROW)
Used to move the screen cursor. For example, "Use the arrow keys"
means to press whichever arrow key moves the cursor to the desired
field on the Local Management screen.
Used to remove characters from a Local Management field. For
example, "Press DEL" means to press the Delete key.
Table 1-2 explains the keyboard