Enterasys SmartSwitch 2200 Series 2E253 User Manual page 145

Table 5-5 Port Redirect Configuration Screen Field Descriptions (Continued)
Use this field...
Frame Format
(Read-Only)
Redirect Errors
(Read-Only)
Source Port [n]
(Selectable)
Destination Port [n]
(Selectable)
Frame Format
(Selectable)
Redirect Errors
(Toggle)
Status
(Toggle)
To...
See the current frame format setting: NORMAL, TAGGED, or
UNTAGGED. The default is NORMAL.
NORMAL – Frames are redirected in the format that they were
received or transmitted on the source port.
TAGGED – Frames are transmitted on the destination port with a
VLAN tag inserted according to the frame classification.
UNTAGGED – Frames are transmitted on the destination port without
a VLAN tag regardless of the format of the received frame.
See whether the corresponding source ports are configured ON to send
errored frames to the destination ports, or OFF to drop all errored
frames and only forward valid frames to the destination ports. All
redirected error frames display in the way they were received or
transmitted on the source port, regardless of the frame format setting.
Select the port [n] that is to be changed to a source port. For details,
refer to Section 5.6.1.
Select the port [n] that is to be changed to a destination port. For
details, refer to Section
Select the frame format for the transmission of redirected frames on the
destination port. NORMAL, TAGGED, or UNTAGGED may be
selected. Refer to the previously described read-only Frame Format
field for details about each format. The default setting is NORMAL.
Set each source port to either ON, to send errored frames to its
destination port, or OFF to drop errored frames and send only valid
traffic to its destination port. The default setting is OFF.
Add or delete source and destination ports selected in the Source Port
[n] and Destination Port [n] fields.
Port Redirect Configuration Screen
5.6.1.
Port Configuration Menu Screens 5-17