Table of Contents
Advertisement
show (Continued)
Options:
PROTOCOL — Specifies a protocol for which information will be
displayed.
TABLE — Specifies a type of table to display.
fid – Show MAC addresses for the filter database identifier (fdbId).
address – Show the address (mac) if it is known by the device.
port – Show the addresses for the port (portNumber) only.
type – Show addresses of the specified type only. Valid types are:
other, tp_learned, sr_learned, self, management, priorityq, multicast,
broadcast, staticfilt, agedout
Default – Show all MAC addresses for the device.
Examples:
-> show Appletalk interfaces
# Interface
AdminStatus
# 1
enabled
# 2
disabled
> show IP ARP
# Interface
MediaType
#3
3(dynamic)
#4
3(dynamic)
# Number of valid entries: 2
-> show mac
MAC Address
-----------------
00:00:1D:00:00:20
00:00:1D:00:03:20
00:00:1D:C3:BE:53
00:00:1D:C3:BE:63
more? (y or n)
OperStatus
enabled
disabled
Physical|Address
00:00:1d:04:40:5d
08:00:20:0e:d8:31
FID
Port
----------
----------
1
0010
1
0010
0
0001
0
0017
MTU
Forwarding
1500
enabled
1500
disabled
NetworkAddress
123.456.40.1
123.456.40.30
Type
----------
tp_learned
tp_learned
self
self
Network Tools Screens
Built-in Commands
Framing
ethernet
ethernet
11-29
Advertisement
Table of Contents
