Table of Contents
Advertisement
Screen Example
Figure 7-3 Static VLAN Configuration Screen
Field Descriptions
Refer to
Table 7-2
for a functional description of each screen field. Refer to
Section 7.3.5
for the application of these fields.
Table 7-2 Static VLAN Configuration Screen Field Descriptions
Use this field...
VLAN ID
– top of screen
(Read-Only)
FDB ID
(Read-Only)
To...
See the assigned VLAN IDs that are configured in the SmartSwitch
device. Initially, only the Default VLAN (VLAN ID: 1) is listed. Up to
ten VLANs can be displayed in the screen.
If there are more than ten VLANs, the NEXT command appears at the
bottom of the screen to allow stepping to the next screen.
See the Filter Database ID (FDB ID) numbers of the associated
VLAN IDs. This value is allocated automatically by the device when
the VLAN is created: either dynamically by GVRP, or when a Static
VLAN is created using this screen.
Static VLAN Configuration Screen
802.1Q VLAN Configuration Menu Screens
Section 7.3.1
through
7-7
Advertisement
Table of Contents
