Table of Contents
Advertisement
FLASH Download Configuration Screen
Field Descriptions
Refer to
Table 4-9
for a functional description of each screen field.
Table 4-9 Flash Download Configuration Screen Field Descriptions
Use this field...
Download Method
(Selectable)
4-32
Device Configuration Menu Screens
To...
Select a method (RUNTIME, DOWNLOAD CONFIG, or UPLOAD
CONFIG) to download (receive) an image file from a TFTP server, or
upload (transmit) or download a configuration file to/from a TFTP
server. The uploading and downloading of a configuration file is
accomplished according to the IP address and the file name entered in
the Download Server IP and Download File Name fields, respectively.
RUNTIME – Used to download a new image from a TFTP server.
This allows the replacement of the image file currently stored in the
device.
Section 4.8.1
DOWNLOAD CONFIG – Used to download a configuration file from
a TFTP server to a device. The configuration file must be one that was
uploaded to the TFTP server from a device of the same model with the
same optional hardware, and running firmware revision 3.10.7 or
higher.
The device automatically reboots after a successful download.
Section 4.8.2
describes how to download a configuration file.
UPLOAD CONFIG – Used to upload a configuration file from a
device to a TFTP server. The configuration file must be one that was
downloaded to a device of the same model with the same optional
hardware, and running firmware revision 3.10.7 or higher.
Section 4.8.3
describes how to download using TFTP.
describes how to download using Runtime.
Advertisement
Table of Contents
