Table of Contents
Advertisement
11.If Inbound or Outbound rate limiting entries are to be configured on other ports on the device,
repeat
steps 1
through
entries may be configured per port with a limit of three for Inbound and three for Outbound. (For
example, two inbound/two outbound, one inbound/two outbound, two inbound/one outbound
and one inbound/one outbound.)
12.After configuring the entry(ies) on the ports, enable the screen function for all the configured
ports by highlighting DISABLED in the Feature field and pressing ENTER. The screen function
is enabled and the Feature field changes to ENABLED.
8.8.2
Changing/Deleting Port Line Items
All, or one or more, line items containing the configured port and its priority, maximum rate, and
associated dropped frames can be changed/replaced or deleted as follows:
Changing One or More Line Items
To change the configuration values in a line item, that line item must be deleted and replaced with
a new entry with the correct configuration values. The new settings can then be configured and
added.
Deleting All Line Items
To delete all configured line items, use the arrow keys to highlight the DEL ALL command field
and press ENTER.
Deleting One or More Line Items
To delete one or more line items, mark each entry and then delete them, as follows:
1. Use the arrow keys to highlight a line to be deleted.
2. Press the M key and an asterisk (*) appears next to the highlighted line to mark it. The DEL ALL
command is changed to DEL MARKED.
3. If more than one line item is to be deleted, repeat
NOTE: To remove a mark, perform
pressing M will remove the mark. If all marks are removed, the DEL MARKED command
is changed back to DEL ALL
4. After the lines are marked, use the arrow keys to highlight the DEL MARKED command field.
5. Press ENTER. The marked line items are deleted and the DEL MARKED command is changed
back to DEL ALL.
10
to configure each port. Any combination of Inbound and Outbound
.
Rate Limiting Configuration Screen
steps 1
and
2
steps 1
and 2. When a marked line is highlighted,
802.1p Configuration Menu Screens
to mark each line.
8-43
Advertisement
Table of Contents
