Enterasys SmartSwitch 2200 Series 2E253 User Manual page 320

Built-in Commands
sat_size
Description:
Syntax:
Options:
Example:
show
Description:
Syntax:
11-28 Network Tools Screens
Displays the current setting or sets the size of the Source Address Table
(Forwarding Database) on the device to either 8000 or 16000 entries. The
default is 8000 entries. When set to 16000, 400 Layer 2/3/4 VLAN
Classification and Priority Assignment entries will be supported. The default
is 1000 Layer 2/3/4 VLAN Classification and Priority Assignment entries.
Changing of sat_size will lead to a reset of the board.
sat_size [ 8 | 16 | status ]
8 — Sets the size of the Source Address Table to 8000 entries.
16 — Sets the size of the Source Address Table to 16000 entries.
status — Displays the current size setting for the Source Address Table.
-> sat_size status
sat size status is 8.
Displays information concerning various components of the device. Protocols
currently supported are IP, IPX, DECnet, and AppleTalk. Components of
those protocols that are currently supported are ARP caches, route tables, FIB
tables, server tables, and interface tables. The number of valid entries in the
table will be outputted at the end of the table display.
NOTE: The Network Tools connection to the device will be
terminated upon execution of this command.
show <PROTOCOL> [TABLE]
show mac <fid> [fdbId] <address> [mac] <port> [portNumber] <type>
[<other | tp_learned | sr_learned |self | management>] [<priorityq
|multicast | broadcast | staticfilt | agedout>]